Could not connect to any license server.The server is down or is not responsive.ANSYSLISERVERS: 2325@User-PCFLEXlm Servers: 1055@User-PCStep-by-step guide:1. Run Server ANSLICADMIN utility (as administrator)2. Click Stop the ANSYS, Inc. License Manager3. Open command prompt and enter netstat -a. Scroll down and you should find port 1055 in use.4. From the ADMIN Utility, click Specify the License Server Machine5.
Click Edit Selected Server Machine6. Change ANSYS FLEXlm port number to any port number other than 1055 (ex. 1056) and click OK7. Go to the folder Program FilesANSYS IncShared FilesLicensing and open license.dat using notepad. Change the port no.
To the one you set above and save.8. From the Server ANSLICADMIN utility, click Install the License File9. Browse for the edited license.dat file10.
Click Start the ANSYS, Inc. License ManagerANSYS. My situation didn’t work till i changed some steps as below:Step-by-step guide:1. Run Server ANSLICADMIN utility (as administrator)2. Click Stop the ANSYS, Inc. License Manager3. Open command prompt and enter netstat -a.
Scroll down and you should find port 1055 in use.4. From the ADMIN Utility, click Specify the License Server Machine5.
Click Edit Selected Server Machine6. Change ANSYS FLEXlm port number to any port number other than 1055 (ex. 1056) and click OK7. Go to the folder Program FilesANSYS IncShared FilesLicensing and delete license.dat.7.1 Go to the folder “MAGNiTUDE” (that can be found from the installation disc)7.2 Double click “ap121calc.exe”, then click “Y” and continue. A text file “license.txt” will be generated7.3 Open the generated license.txt and edit the default port number to the number previously changed at ANSYS FLEXIm port number, then save it.8. From the Server ANSLICADMIN utility, click Install the License File9. Browse for the edited license.txt file10.
Click Start the ANSYS, Inc. License Manager and the status should suppose show up as:“ANSYS, Inc. License Manager status:Licensing Interconnect: runningLicensing Interconnect Monitor: runningFLEXlm: running”.
This function reads the mesh data for all structural elements listed below, but includes corner nodes only (i.e. Disregards any midside nodes). Both displacement- and stress results are imported. All data is returned in the 'model' struct as explained below. The function is intended for further postprocessing FE results in Matlab.Before using the function, the ANSYS model must be exported to a text file. Use the supplied 'export.mac' to do this.
In Workbench, add a 'Commands (APDL)' block under 'Solution' and paste in the macro contents. In Classic, run macro by clicking 'FileRead input from.'
Ansys Cw License Txt 2
Ansys License Manager Download
And selecting the 'export.mac' file.